Home > Error Cannot > Error Cannot Configure Device. Expected Jtag Id Code

Error Cannot Configure Device. Expected Jtag Id Code

Expected JTAG ID code 0x025030DD for device 1, but found JTAG ID code 0x00000000. Need to get another one. It > > was working properly until I started getting the following error: > > > "Error: Can't configure device. Replacing the >> > cable with a new one doesn't help either. >> >> > Thanks, >> > Vijay. > > > Thanks for your help ! Check This Out

right now i am working on a design which rotates a square through the 7seg display like in this picture. Expected JTAG ID code 0x02B140DD for device 1, but found JTAG ID code 0xFFFFFFFF. I've yet to see the ACTive LED not lit when there's power. We are unable to accept your feedback at this time. anchor

I wonder if you got it with empty flash because there isn't much else that can fail on this board. Expected JTAG ID code Hi bradomyn, Check that all the in/out of your top fpga have a pin location assigned. Luckily it uploads fine so maybe it'll upload when I finally get all the modules in.

Expected JTAG ID code 0x029030DD for device 1, but found JTAG ID code 0x029FB0DD. Perhaps it is so old that Altera drivers don't support it anymore. Restarted the computer, rewrote the project, checked if the correct device is chosen and updated all the drivers, still doesn't upload. Can you post the complete log, not just the error?

See also: Image of ProgrammerOverview: Working with Chain Description Files Products Solutions Support About Buy Log In Welcome Logout Menu Popular Links: Download Center Support Resources Documentation Design Software Training Program Logged night vision Gandalf_Sr Regular Contributor Posts: 238 Country: Re: Altera USB Programmer « Reply #34 on: August 19, 2014, 09:56:01 PM » I just got 2 from eBay that were Reply With Quote December 5th, 2013,08:18 AM #2 arriacinq View Profile View Forum Posts Altera Scholar Join Date Apr 2013 Posts 35 Rep Power 1 Re: Error (209015): Can't configure device. https://www.altera.com/support/support-resources/knowledge-base/solutions/rd01172013_21.html permalinkembedsavegive gold[–]Agentmore[S] 0 points1 point2 points 8 months ago(0 children)Thanks I made a new project and wanted to unit test my slowTick module but it looks like it might not be working.

ACTION: Make sure the target device's location on the circuit board matches the device's location in the device chain as displayed in the Programmer window. I then had look into the schematic for the PSU and it's clear the there are a much smalle PSU on the beMicroboard only 4 amps for the core where the I have set all the settings correct for the device i'm using and it's had no problems programming in the past (i have already done over a dozen other smaller projects, Jun 21 at 18:04 Looks like you probably have a bad connection somewhere, seeing as it's finding a 0x00000000 ID. –DerStrom8 Jun 21 at 18:41 Of something

  • This problem occurs when the target device's location on the circuit board does not match the device's location in the device chain in a Chain Description File (.cdf), as displayed in
  • Expected JTAG ID code 0x20070DD for device 1, but found JTAG ID code 0xFFFFFFFF." Also, when I use the "Auto Detect" feature of Quartus II Programmer, I get "EPS180/_HARDCOPY_FPGA_PROTOTYPE" instead of
  • Reverse a hexadecimal number in bash Product of all divisors=cube of number.
  • It >> > was working properly until I started getting the following error: >> >> > "Error: Can't configure device.
  • Error (209012): Operation failed Info (209061): Ended Programmer operation at Mon Feb 22 22:45:51 2016 Info (209060): Started Programmer operation at Mon Feb 22 22:46:25 2016 Error (209037): JTAG Server can't
  • I'm pleased you got it sorted.
  • SignalTap will be ready to use!If it doenst work, you probably have a problem with the Jtag cable or driver!And ..yess @2: 5cseba6 is OK...
  • Send Feedback How are we doing?
  • You won't be able to vote or comment. 123Quartus error programming device (self.FPGA)submitted 8 months ago * by AgentmoreI am working my way through some basic FPGA assignments with my Terasic DE1-SoC to get me started
  • Any other design uploads fine and I have done nothing different.

Info (209060): Started Programmer operation at Mon Feb 22 22:38:34 2016 Error (209031): Device chain in Chain Description File does not match physical device chain -- expected 3 device(s) but found see this here Info (140120): Import completed. 829 assignments were written (out of 835 read). 0 non-global assignments were skipped because of entity name mismatch. Expected JTAG ID code 0x20070DD for > > device 1, but found JTAG ID code 0xFFFFFFFF." > > > Also, when I use the "Auto Detect" feature of Quartus II Programmer, Check the cables!

We are sorry. his comment is here Not the answer you're looking for? Need to change cash to cashier's check without bank account (Just arrived to the US) Would we find alien music meaningful? and Can't configure device.

Logged martinayotte Contributor Posts: 17 Re: Altera USB Programmer « Reply #31 on: March 08, 2014, 11:14:31 AM » Anyway, fortunately, when I've ordered the FT245+CPLD few weeks ago, I've EDIT: Just tried to upload an older .sof from a simler project i did and it works fine. But shipment will take 4 weeks before I can try it ...(I've choose the following one : http://www.ebay.com/itm/FT245-CPLD-USB-Blaster-Programmer-Download-For-Altera-FPGA-CPLD-Stable-Version-/180978173969?pt=LH_DefaultDomain_0&hash=item2a2323c811)Is anybody got such behaviour with their clones ?Thanks in advance. this contact form So it must have been programmed with *something*.

I don't have access to a DE1-SoC, so I don't know how you need to configure Quartus for it properly. more stack exchange communities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed usually they are very nervous about getting bad reviews on ebay.

Expected JTAG ID code Thread Tools Show Printable Version Email this Page… Subscribe to this Thread… Search Thread Advanced Search Display Linear Mode Switch to Hybrid Mode Switch to Threaded

It was working properly until I started getting the following error: "Error: Can't configure device. We have received your feedback. regards, Reply With Quote September 20th, 2016,07:47 AM #3 Wiljan View Profile View Forum Posts Altera Pupil Join Date Jun 2009 Posts 11 Rep Power 1 Re: Error (209015): Can't configure Expected JTAG ID code 0x02D120DD for device 2, but found JTAG ID code 0x00000000.

My previous computer was a 10-15 year old laptop, and the > parallel-port is probably not working properly. > Reply You might also like... (promoted content) The power of touch: How So what do i say when to describe the FPGA is running what i designed? Logged JimHorn Contributor Posts: 6 Country: Re: Altera USB Programmer « Reply #36 on: August 31, 2016, 03:52:16 AM » Quote from: Gandalf_Sr on August 19, 2014, 09:56:01 PMI just http://optimisersonpc.com/error-cannot/error-cannot-load-file-code-5555h-boot-auto-ini.html Replacing the > > cable with a new one doesn't help either. > > > Thanks, > > Vijay.

I no longer seem to be able to program my device. How safe is 48V DC? The USB blaster is built-in the board. The design im loading is a PWM generator which is lead by a clock divider, nothing too complicated.

To start viewing messages, select the forum that you want to visit from the selection below. Info (209016): Configuring device index 2Info (209017): Device 2 contains JTAG ID code 0x02D020DDError (209040): Can't access JTAG chainError (209015): Can't configure device. According to Quartus Help for this Error: CAUSE: You directed the Programmer to configure the specified device. They are all in the same daisy chain (JTAG).hope it helps!byeM zglickst 2015-07-24 14:36:56 UTC #3 Thanks for the reply.

It > was working properly until I started getting the following error: > > "Error: Can't configure device. Sometimes the programming utility is set up to auto-detect the devices on the board, sometimes it isn't. That is 1/2 the speed, not 1/10. The CPU's 8MHz crystal is oscillating well, and as mentioned it is recognized by the Altera driver.

Home Forum New Posts FAQ Calendar Community Groups Forum Actions Mark Forums Read Quick Links Today's Posts View Site Leaders Forum Rules Marketplace Shared Material FAQ About Us Register Chinese Forum Very > strange ... I have to interpret that 10 000 is 00 0001 and then somehow a Volatile Key has ended up in our FPGA (more skeptical). Aside all this trial and error, I'm wondering how is possible that the FPGA can be detected in the JTAG chain with the correct JTAG ID when I open the JTAG:

One thing that concerned me is that when the analyzer comes up there are 3 options to program the .sof file to, with option 2 being the correct choice to program

Back to Top